We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007185
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 1/2 |
Stock availability:
Expected within 5 days
If you are looking for Aventics (brand of Emerson) R412007185, catch up with FAMAGA, the world's major retailer of streamlined equipment. Our company has operated for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and particular attention to each consumer. We appreciate everyone, who liased with us - hence, our regular consumers bring in the most convenient purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4000 such buyers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Vietnam, Georgia, Bahrain, Norway, Mali, The Gambia, East Timor, Papua New Guinea, Guyana, Honduras, Belarus, Poland, Eritrea, Ecuador, Tajikistan, Estonia, Togo, Afghanistan, Fiji, El Salvador, Iran, Nicaragua, Finland, Croatia, Zambia, Panama, South Korea, Bosnia and Herzegovina, Greece, Pakistan, Zimbabwe, Haiti, Albania, Cape Verde, Kazakhstan, Indonesia, Peru, Lithuania, Morocco, Kyrgyzstan, Brunei, Kenya, Angola, Malaysia, Ireland, Cyprus. A well-shaped logistics bond and a partnership network let us to send our products anywhere in the globe with no delay without undermining product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is ascending every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To request or order, get in touch with us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |