We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300350
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 6900 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0821300350, communicate with FAMAGA, the world's primary distributor of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are represented in the quality of outcomes and particular attention to each consumer. We understand everyone, who worked with us - hence, our regular purchasers accept the most acceptable purchase forms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly sign new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Moldova, Namibia, Panama, New Zealand, Myanmar, Egypt, Equatorial Guinea, Chile, Colombia, Kazakhstan, Gambia, Bulgaria, Liberia, Bhutan, United States, Austria, Samoa, Nepal, Mali, Peru, Brazil, Iceland, Kyrgyzstan, Guyana, Tonga, Iraq, Cyprus, Uruguay, Costa Rica, Greece, Armenia, Israel, Norway, Tanzania, Guatemala, Andorra, Cameroon, India, Brunei. A well-shaped logistics bond and a partnership network let us to ship our goods anywhere in the planet quickly without discrediting product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are happy that users choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as keep on top of it.
To request or order, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 6900 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 50 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |