We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822332501
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822332501, communicate with FAMAGA, the world's principle vendor of streamlined equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and individual attention to each orderer. We appreciate everyone, who conspired with us - so, our regular customers procure the most desirable purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Iraq, Romania, Guinea, Pakistan, Lithuania, Angola, Mauritius, Serbia, New Zealand, Paraguay, Russia, Ukraine, Philippines, Saudi Arabia, Lebanon, Guatemala, Latvia, Zambia, Eswatini, Indonesia, Botswana, Thailand, Comoros, Jordan, Malta, Japan, Montenegro, Jamaica, Gambia, India, North Korea, Benin, Kenya, Moldova, Andorra, Djibouti, Brunei, Antigua and Barbuda, Yemen, Switzerland, Algeria, Tajikistan, Iceland, Costa Rica, Australia, Equatorial Guinea. A well-developed logistics series and a partnership network assist us to deliver our units anywhere in the globe with no delay without damaging product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |