We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334203
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822334203, catch up with FAMAGA, the world's major supplier of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each customer. We praise everyone, who engaged with us - so, our regular consumers bring in the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the world Germany, United Kingdom, Oman, Greece, Sudan, Malawi, Bhutan, Kuwait, Armenia, Myanmar, Seychelles, Latvia, Mali, Guinea, Malta, Antigua and Barbuda, Sweden, Saudi Arabia, Namibia, Belize, Vietnam, Liberia, Tanzania, Azerbaijan, Luxembourg, Andorra, Niger, Comoros, Lithuania, Libya, India, Finland, Equatorial Guinea, Suriname, Tonga, Morocco, Togo, Iraq, Tajikistan, Nigeria, East Timor, Turkey, Central African Republic. A advanced logistics network and a partnership network assist us to dispatch our units anywhere in the globe quickly without disreputing product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |