We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300300
Description
| Parts | Filter pressure regulator |
| Condensate drain | semi-automatic, open without pressure |
| Relieving exhaust | with relieving air exhaust |
| filter porosity | 5 µm |
| Pressure gauge | with pressure gauge |
| Housing | Die cast zinc |
| Reservoir | Polycarbonate |
| Sealing material | Acrylonitrile butadiene rubber |
| suitable for ATEX | |
| Nominal flow Qn | 1650 l/min |
| Compressed air connection | G 1/4 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) 0821300300, catch up with FAMAGA, the world's chief vendor of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are outlined in the quality of outputs and particular attention to each purchaser. We esteem everyone, who liased with us - hence, our regular purchasers procure the most beneficial purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such clients, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Philippines, Indonesia, Angola, Hungary, Brunei, Israel, Georgia, Mexico, Oman, Croatia, Eswatini, Namibia, Burma, Turkmenistan, Tanzania, Kiribati, Gambia, Cape Verde, Uganda, Chad, Senegal, Azerbaijan, Netherlands, Benin, Ecuador, Tonga, Central African Republic, Nicaragua, East Timor, Ghana, India, Peru, Bangladesh, Morocco, Mauritius, Jordan, Belarus, Greece, Czech Republic, Denmark, Bosnia and Herzegovina, Andorra, Chile, Kenya, Qatar. A advanced logistics connection and a partnership network allow us to conduct our products anywhere in the planet immediately without damaging product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this quantity is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as stay in control.
To inquire or order, get in touch with us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Version | 1-part, Can be assembled into blocks |
| Parts | Filter pressure regulator |
| Mounting orientation | vertical |
| Certificates | suitable for ATEX |
| Working pressure min./max. | 2 ... 16 bar |
| Ambient temperature min./max. | -10 ... 60 °C |
| Medium temperature min./max. | -10 ... 60 °C |
| Medium | Compressed air Neutral gases |
| Nominal flow Qn | 1650 l/min |
| Regulator type | Diaphragm-type pressure regulator |
| Regulator function | with relieving air exhaust |
| Adjustment range min./max. | See table |
| Pressure supply | single |
| Filter reservoir volume | 25 cm³ |
| Filter element | exchangeable |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
| Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
| Material |
|---|
| Housing | Die cast zinc |
| Front plate | Acrylonitrile butadiene styrene |
| Seals | Acrylonitrile butadiene rubber |
| Reservoir | Polycarbonate Die cast zinc |
| Protective guard | Steel |
| Filter insert | Polyethylene |
