We are not the manufacturer, authorised distributor or authorised representative of the Bei Sensors (brand of Sensata Technologies) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Bei Sensors (brand of Sensata Technologies)
Country
USA
Name
HS35F-75-R2-SS-2048-ABZC-28V/V-SCS18-S
Part number
NEG0002846
Description
P/N: 01070-1077
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
| Shaft Bore | 1.00”, 0.875”, 0.750”, 0.625”, 0.500”. All are supplied with insulating sleeves. |
| Allowable Misalignment | 0.005” T.I.R. on mating shaft 0.75” from shaft end |
| Bore Runout | 0.001” T.I.R maximum |
| Starting Torque at 25°C | Through shaft version (SS) = 7 in-oz (max); Blind shaft version (BS) = 4 in-oz (max) |
| Bearings | 52100 SAE High carbon steel |
| Shaft Material | 416 stainless steel |
| Bearing Housing | Die cast aluminum with protective finish |
| Cover | Die cast aluminum with protective finish |
| Bearing Life | 7.5 X 109 revs (50,000 hrs at 2500 RPM) |
| Maximum RPM | 6,000 RPM (see Frequency Response below) |
| Moment of Inertia | 0.019 oz-in-sec2 |
| Weight | 18 oz typical |
| Code | Incremental |
| Output Format | 2 channels in quadrature, 1/2 cycle index gated with negative B channel |
| Cycles Per Shaft Turn | 1 to 80,000. |
| Supply Voltage | 5 to 28 VDC available |
| Current Requirements | 100 mA typical + output load, 250 mA (max) |
| 15V/V | Line Driver, 5–15 VDC in, Vout = Vin |
| 28V/V | Line Driver, 5–28 VDC in, Vout = Vin |
| 28V/5 | Line Driver, 5–28 VDC in, Vout = 5 VDC |
| 28V/OC | Open Collector, 5–28 VDC in, OCout |
| Protection Level | Reverse, overvoltage and output short circuit |
| Frequency Response | 150 kHz (up to 5000 cpt resolution; 300 KHz above 5000 cpt) |
| Note | Consult factory for other electrical options |
| Enclosure Rating | NEMA 4 & 13 (IP65) when ordered with shaft seal (on units with an MS connector) or a cable gland (on units with cable termination) |
| Temperature | Operating, 0º to 70º C; extended temperature testing up to 105º C available; Storage, -25º to 90º C unless extended temperature option called out |
| Shock | 50 g’s for 11 msec duration |
| Vibration | 5 to 2000 Hz @ 20 g’s |
| Humidity | 98% RH without condensation |
