Gâche P2 COMITRONIC-BTI

Contactless safety interlocking with encoded striker for "casing / heavy door" Contactless "door lock" encoded detection Contactless "door open / closed" detection Unlock command with just one contact during serialization of products Emergency evacuation handle Level of performance with AWAX controller: up to PL = e Safety category with an external controller: up to 4 Cycle before dangerous failure: B10d = 1,000,000 Bolt travel: 14 mm Bolt diameter: 24 mm (beveled for "under-voltage" closed position or "lock" mode) S hearing strength: 2000 N Gap between strike and lock: 2 to 4 mm (adjustable when assembling, recommended to 4 mm) Maximum lateral offset between strike and lock: +/- 2.5 mm Maximum angular displacement between strike and lock: +/- 5° Safety locking contacts: 2 x NO 2A/50V Safety door contacts: 2 x PNP/500 mA Unlock command: PLC-compatible (12~30 VDC/2~5 mA) F ault Diagnosis: bolt stuck, power out of specification, temperature out of specification, electromagnet failure, serialization failure Reset: on command "SMART consumption" for minimal power consumption when connected in series Auxiliary release: female triangle key 8 mm x 14.2 mm (optional) Attachment: 4 M6 screws (screw covers supplied, screws not included) Mounting position: 2 (door pulling, door pushing) Material: PA6 fiberglass reinforced Electrical connection: very resistant 50 cm PUR UL20549 cord with M23 connector or cable (contact us) Water resistance: IP 65 Operating temperature: -15°C to +45°C Marking: screen printed + serial no. for traceability Reference for evacuation handle: AT