DAT9000-USB-IO Datexel Master Unit

The device DAT9000-IO-USB is an Intelligent unit able to control a network of slave Modbus RTU devices connected on serial line RS-485 Master or Modbus TCP through the Ethernet interface executing the reading and writing of the field values and performing the logical and mathematical functions necessary for the system working, managing up to 10 task of recording memorized on files saved on the USB device. The device is equipped with 4 digital inputs channels and 2 relay outputs. A 32-bit pulse counter is available for each digital input. By means of the Ethernet interface or the RS-485 “SLAVE” or uUSB ports it is possible to read and write, in real time, the internal registers value. By Ethernet it is possible to get access to the files saved on the USB device when the Data-Logger function is active. The supplied CVPROG cable allows you to configure / program the device without using an external power supply. Moreover, by means of the Ethernet interface, or by the RS-485 “SLAVE” or uUSB ports it is possible to: – Programming of the Control Logic – Monitor, request of data, programming in real time the Intelligent Unit – Direct programming and request of data from the Slave devices connected on the RS-485 Master.