We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
BX80S/50-0H
Category
Area Sensors
Description
Area, H=70mm-6mm pitch,Emitt
Stock availability:
On request
If you are questing MD Micro Detectors BX80S/50-0H, connect FAMAGA, the world's chief vendor of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of outcomes and private attention to each orderer. We respect everyone, who engaged with us - therefore, our regular customers receive the most attractive purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Bhutan, India, Ireland, Liechtenstein, Hungary, Swaziland, Israel, Uzbekistan, Kenya, Malaysia, Cameroon, Tunisia, Greece, Malawi, Nigeria, Russia, Afghanistan, New Zealand, Kuwait, Nicaragua, Eswatini, El Salvador, Guatemala, Turkmenistan, Haiti, Tanzania, Dominica, Uruguay, Jordan, Mongolia, Austria, Mauritius, Belize, Sudan, Senegal, Chile, Iran, Namibia, Zambia, Niger, Bulgaria. A well-developed logistics series and a partnership network guide us to send our products anywhere in the globe with no delay without discrediting product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of industrial equipment.
All products from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this amount is amounting every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, phone us or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Distanza di rilevazione nominale | dipende dal ricevitore |
Deriva termica | ?10% |
Distanza tra i raggi | 6mm |
Altezza controllata | 70mm |
Numero di raggi | 12 |
Regolazione di sensibilita | Si |
Principio di funzionamento | Emettitore |
Tensione di alimentazione | 12-24Vcc |
Assorbimento a vuoto | 100mA |
Corrente di carico | ?100mA |
Corrente di perdita | 10µA |
Caduta di tensione in uscita | ?1.2V IL =100 mA |
Massima ondulazione residua | ? 10% |
Indicatori LED | emettitore: verde (alimentazione) rosso (allarme sincronizzazione) giallo (stato uscita) - ricevitore: verde (alimentazione) rosso (allineamento) giallo (stato uscita) |
Ritardo alla disponibilita | 500ms |
Protezione al corto circuito | Si (auto reset) |
Protezione da inversione di polarita | Si |
Emissione | Led Infrarosso |
Immunita alla luce ambiente | 1.500 lux max. (lampada ad incandescenza), 4.500 lux max. (luce solare) |
Protezioni da sovratensioni impulsive | Si |
Dimensioni | 44mm x 120mm x 20mm |
Peso | 260 … 300g |
Materiale corpo | PBT |
Connessioni | M12 connettore maschio |
Materiale parte attiva | PC |
Coppia di serraggio | 25Nm |
Temperatura operativa | -25°C…+50°C (senza condensa) |
Temperatura di stoccaggio | -40°C…+80°C |
Certificazioni | CE |
Compatibilita elettromagnetica | IEC 60947-5-2 |
Urti e vibrazioni | IEC EN 60947-5-2 |
Grado di Protezione | IP67 |