We are not the manufacturer, authorised distributor or authorised representative of the Pepperl+Fuchs brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pepperl+Fuchs
Country
Germany
Name
NBB8-18GM30-E2-V1
Part number
087743
Type
Inductive sensor
Description
Inductive sensor NBB8-18GM30-E2-V1
Stock availability:
On request
If you are looking for Pepperl+Fuchs NBB8-18GM30-E2-V1 087743, communicate with FAMAGA, the world's key retailer of industrialized equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of outputs and private attention to each orderer. We cherish everyone, who worked with us - hence, our regular consumers pick up the most helpful purchase forms and discounts on the manufacturing equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Hungary, Czech Republic, Guatemala, Croatia, Mexico, Colombia, Bosnia and Herzegovina, Djibouti, Philippines, Kyrgyzstan, Norway, Burkina Faso, Mali, Oman, Kuwait, Liberia, Switzerland, Australia, Lithuania, Mauritania, Malta, Togo, Zimbabwe, South Korea, Mozambique, Guyana, Armenia, United Arab Emirates, Yemen, Comoros, Mauritius, Paraguay, Panama, South Sudan, Georgia, Zambia, Costa Rica, Kazakhstan, Seychelles, Brunei, Angola, Samoa, Syria, Ireland. A advanced logistics link and a partnership network cheer us to ship our products anywhere in the world immediately without disreputing product quality.
A special source of repute for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To request or place an order, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
General specifications | |
---|---|
Switching function | Normally open (NO) |
Output type | PNP |
Rated operating distance | 8 mm |
Installation | flush |
Output polarity | DC |
Assured operating distance | 0 ... 6.48 mm ( -25 ... 70 °C (-13 ... 158 °F) ) 0 ... 6.08 mm ( -40 ... -25 °C (-40 ... -13 °F) ) |
Reduction factor rAl | 0.45 |
Reduction factor rCu | 0.4 |
Reduction factor r304 | 0.7 |
Output type | 3-wire |
Nominal ratings | |
Operating voltage | 10 ... 30 V |
Switching frequency | 0 ... 500 Hz |
Hysteresis | typ. 5% |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Voltage drop | &le, 3 V |
Operating current | 0 ... 100 mA |
Off-state current | 0 ... 0.5 mA typ. 0.1 µ,A at 25 °C |
No-load supply current | &le, 15 mA |
Switching state indicator | LED, yellow |
Functional safety related parameters | |
MTTFd | 2090 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Approvals and certificates | |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated &le,36 V |
Ambient conditions | |
Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications | |
Connection type | Connector M12 x 1 , 4-pin |
Housing material | brass, nickel-plated |
Sensing face | PBT |
Degree of protection | IP67 |