We are not the manufacturer, authorised distributor or authorised representative of the Telco brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Telco
Country
Denmark
Name
PAB 30 A 209
Part number
6083
Description
Photoelectric Amplifier Bus
Stock availability:
On request
Function | Amplifier |
Supply Voltage | 10 – 30 V dc / 24 V ac |
Number of Channels | 3 |
Sensing Range | 47 m |
Sensitivity Adjustment | Manual |
Output | 3 individual PNP |
Timer | On/Off Delay |
Housing | Removable screw terminals |
Supply Voltage | 10 - 30 V dc or 24 V ac |
Voltage Tolerance | +/- 10 % |
Current Consumption | Max. 2,6 W |
Response Time ton / toff, Transistor | Short range: 24 ms / 24 ms Long range: 60 ms / 60 ms |
Output, Transistor | 30 V dc / 100 mA |
Alarm Output, Transistor | PNP - 30 V dc / 100 mA |
Test Input | Yes |
Power On Indicator | Green LED |
Output Indicator | Yellow LED |
Alarm Indicator | Red / yellow LED |
LR Sensor Failure Indicator | Yelow LED |
LT Sensor Failure Indicator | Red LED |
Master/Slave Address Indicator | Green / orange LED |
Signal Level Indicator | Green LED |
Sensor Monitor LED Drive | Green LED on the receiver: ‘Power ON’ Yellow LED on the transmitter: PAB output activated |
Hysteresis | Approx. 35 % |
Operation Frequency, Transistor | Short range: 21 Hz Long range: 8 Hz |
Delay Time ton / toff | 0 – 10 sec, adjustable |
Housing Material | Polyamide |
Operation Temperature | – 10 to +50 °C |
Storage Temperature | – 40 to +80 °C |
Sealing Class | IP 40 |